800.616.0584
800.616.0584
25' 9-25 Pin Serial RS-232-C Cable
Original Craft ROBO cutting mat/media carrier Sheet. For use only with the Craft ROBO CC100, CC200, and Wishblade Digital Cutters. Size 8.5" x 12....
View full detailsReusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet.This cutting...
View full detailsCompatible with Graphtec FC and CE series.
10' 25-25 Pin Serial RS-232-C Cable
10' 9-25 Pin Serial RS-232-C Cable
10' Mac Serial
10' Parallel AC0223PAR-10
15' USB (A to B) Cable
Compatible with Magnets SKU# 51409-061B Compatible Models# FC, FCX, CE Series The anti-static cord is made up of tiny conductive micro-fibers that ...
View full detailsBallpoint pen adapter PM-BH-001 diameter 8 - 11.3 mm. for Graphtec CE Lite-50 Compatible Models# CE Lite-50.
Ballpoint pen holder for a black, oil-based pen (KB700-BK). Shown assembled with the KB700-BK (sold separately).Accessories: BALLPOINT PEN BLACK ...
View full detailsRoller type creasing tool for card stock, cardboard. Compatible with FCX2000 Series.
Oil-based pen 0.7 point (KB700-BK), 10 pens/pk Compatible with: Graphtec PHP34-BALL pen holder (Pen holder is not included)
3.0mm, Bladeholder for CB30UC-1 blade / For Thick Rigid Materials / For use with FC2250, and FCX2000. Ballpoint pen holder for black, oil-based pen...
View full detailsCompatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60. Designed for use with 0.9mm CB09UB blades for vinyl and window tint film cutting. N...
View full detailsCompatible with blades: CB15U-K30*, CB15U, CB15UA, CB15U-K20-2SP, CB15UA-K30. For use with 1.5mm*** CB15 Blades. For use with 1.5mm CB15 Blades. ...
View full detailsCompatible with blades: CB09UB, CB09UB-K60 0.9mm, blue top, black brass tip. ATTENTION: If you are using CB09UA Blade (with spring); Insert only th...
View full detailsCarrier Sheets 13.7" x 20.7" for the media without mount adhesive area. This carrier sheet compatible with Graphtec CE Lite-50 for 351 mm (13") wi...
View full detailsCutting Mat for Graphtec CE Lite-50 for replacement.
Genuine replacement cutting mat for the CE6000 Series of Graphtec cutting plotters.Compatible with CE6000-40/60 or 120, and CE6000 Plus Series. Ple...
View full detailsA media catch basket compatible with Graphtec CE6000 Plus Series - 120 Cutting area of CE6000-120 Plus when using basket is 3 ft 11 in x 16 ft 4.85...
View full detailsMax. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...
View full detailsMax. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...
View full detailsMax. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...
View full detailsSuperSteel replacement cross cutting blade for all FC8600, FC8000, FC7000 MK2 and FC7000 cutting plotters.
Cross cutter PM-CC-001 for manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter is compatible with Graphtec CE Lite-50 for manual c...
View full detailsThis muffler is effective in noise reduction from the vacuum hold-down motor of the FC2250 Flatbed Series—without diminishing the effectiveness of ...
View full detailsGenuine Graphtec replacement part: FC5100 cutting mat/strip.Please choose your cutter size. Each order contains (1) Teflon cutting Mat/Strip.
Genuine Graphtec replacement part: FC8000/FC7000 cutting mat/strip.Please choose your cutter size. Each order contains (1) Teflon cutting mat/strip...
View full detailsGenuine Graphtec replacement part: FC8600-60 (FC7000) cutting mat/strip. Please choose your cutter size. Each order contains (1) cutting mat/stri...
View full detailsGraphtec FC9000 Series Vinyl Cutter The flagship FC9000 Series is Graphtec’s most advanced, versatile roll-fed cutting plotter to date. Revered aro...
View full detailsSTAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high-quality FINE POINT 0.4mm TIP. Used for plotting...
View full detailsThe NEW Graphtec Fiber-tip pen holder for *STAEDTLER LUMOcolor Fiber pens gives you the versatility of high quality, re-usable fiber tip pen holder...
View full detailsSTAEDTLER LUMOcolor Fiber pens give you the versatility of a high-quality FINE POINT 0.4mm TIP. Used for plotting with the Graphtec FIBER TIP PEN H...
View full detailsLong blade - thick media (soft rubber, polyurethane sheet up to 1 mm) Compatible Models# CE Lite-50
The anti-static cord is made up of tiny conductive micro-fibers that cause the static charge to ionize to the ground. The anti-static cord is desi...
View full detailsPerfect for large rolls of media and extended cutting distances. Includes one pair of media flanges.
Compatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60. 0.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION...
View full detailsCreasing tool 0.03” fine tipped creasing tool for paper. Not recommended for E-flute creasing; Fine tip may puncture corrugated boards. Compatible ...
View full detailsCreasing tool 0.05” tip creasing tool for cardboard Compatible with Graphtec FCX, FC series
For heavy media, card stock, and chipboard. Compatible Models# FC, and FCX Series
Cutting plotter pouncing tool PPA33-TP12 compatible with Graphtec Series FC8600, FC8000, FC7000, FC5100, FC4100.
Genuine Graphtec replacement part. Push/Pinch Roller for FC and CE roll feed cutting plotters. ~15mm diameter (including rubber wheel) ~12mm diame...
View full detailsGraphtec's Rhinestone Backing Board is one part of a total Graphtec Rhinestone Solution, including the Graphtec Rhinestone Backing Stencil, Graphte...
View full detailsCreasing Tool (wheel) Roller Type 0.6 mm for Corrugated Cardboard. Compatible Models# Flatbeds; FC2250, FCX2000 Series
For cardboard and fluted boards. Compatible Models# Flatbeds; FCX2000, FC2250 Series
Standard blade - normal media (film, paper, others) Compatible Models# CE Lite-50