Products

Compatible with blades: CB15U-K30*, CB15U, CB15UA, CB15U-K20-2SP, CB15UA-K30.  For use with 1.5mm*** CB15 Blades.  For use with 1.5mm CB15 Blades. ...

Compatible with blades: CB09UB, CB09UB-K60 0.9mm, blue top, black brass tip. ATTENTION: If you are using CB09UA Blade (with spring); Insert only th...

Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area.  This carrier sheet compatible with Graphtec CE Lite-50 for 351 mm (13") wi...

Cutting Mat for Graphtec CE Lite-50 for replacement.

Genuine replacement cutting mat for the CE6000 Series of Graphtec cutting plotters.Compatible with CE6000-40/60 or 120, and CE6000 Plus Series. Ple...

A media catch basket compatible with Graphtec CE6000 Plus Series - 120 Cutting area of CE6000-120 Plus when using basket is 3 ft 11 in x 16 ft 4.85...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

SuperSteel replacement cross cutting blade for all FC8600, FC8000, FC7000 MK2 and FC7000 cutting plotters.

Cross cutter  PM-CC-001 for manually cutting from sheets and rolls.  Cross-Cutting Blade/Cutter is compatible with Graphtec CE Lite-50 for manual c...

This muffler is effective in noise reduction from the vacuum hold-down motor of the FC2250 Flatbed Series—without diminishing the effectiveness of ...

Genuine Graphtec replacement part: FC5100 cutting mat/strip.Please choose your cutter size. Each order contains (1) Teflon cutting Mat/Strip.

Genuine Graphtec replacement part: FC8000/FC7000 cutting mat/strip.Please choose your cutter size. Each order contains (1) Teflon cutting mat/strip...

Genuine Graphtec replacement part: FC8600-60 (FC7000)  cutting mat/strip. Please choose your cutter size. Each order contains (1)  cutting mat/stri...

Graphtec FC9000 Series Vinyl Cutter The flagship FC9000 Series is Graphtec’s most advanced, versatile roll-fed cutting plotter to date. Revered aro...

STAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high-quality FINE POINT 0.4mm TIP. Used for plotting...

The NEW Graphtec Fiber-tip pen holder for *STAEDTLER LUMOcolor Fiber pens gives you the versatility of high quality, re-usable fiber tip pen holder...

STAEDTLER LUMOcolor Fiber pens give you the versatility of a high-quality FINE POINT 0.4mm TIP. Used for plotting with the Graphtec FIBER TIP PEN H...

Long blade - thick media (soft rubber, polyurethane sheet up to 1 mm) Compatible Models# CE Lite-50

The anti-static cord is made up of tiny conductive micro-fibers that cause the static charge to ionize to the ground.  The anti-static cord is desi...

Perfect for large rolls of media and extended cutting distances. Includes one pair of media flanges.

Compatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60.  0.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION...

Creasing tool 0.03” fine tipped creasing tool for paper. Not recommended for E-flute creasing; Fine tip may puncture corrugated boards. Compatible ...