Cutters & Accesories

Graphtec FC9000 Series Vinyl Cutter The flagship FC9000 Series is Graphtec’s most advanced, versatile roll-fed cutting plotter to date. Revered aro...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

A media catch basket compatible with Graphtec CE6000 Plus Series - 120 Cutting area of CE6000-120 Plus when using basket is 3 ft 11 in x 16 ft 4.85...

This muffler is effective in noise reduction from the vacuum hold-down motor of the FC2250 Flatbed Series—without diminishing the effectiveness of ...

Creasing Tool (wheel) Roller Type 0.6 mm for Corrugated Cardboard. Compatible Models# Flatbeds; FC2250, FCX2000 Series

For cardboard and fluted boards. Compatible Models# Flatbeds; FCX2000, FC2250 Series

3.0mm, Bladeholder for CB30UC-1 blade / For Thick Rigid Materials / For use with FC2250, and FCX2000. Ballpoint pen holder for black, oil-based pen...

Perfect for large rolls of media and extended cutting distances. Includes one pair of media flanges.

Roller type creasing tool for card stock, cardboard.  Compatible with FCX2000 Series.

For heavy media, card stock, and chipboard. Compatible Models# FC, and FCX Series

3.0mm, Bladeholder for CB30UC-1 blade / For Thick Rigid Materials / For use with FC2250, and FCX2000. Ballpoint pen holder for black, oil-based pen...

Angle 45° Diameter 3mm super steel blade for cutting thick rigid materials such as corrugated paper up to E flute or chipboard up to 2 mm thick. Co...

Angle 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 1.5 mm thick.  And also small detailed characters on marking film (up...

The NEW Graphtec Fiber-tip pen holder for *STAEDTLER LUMOcolor Fiber pens gives you the versatility of high quality, re-usable fiber tip pen holder...

Angle 45° Diameter 1.5mm  Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (laminates, smart device, device screen pro...

Compatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60.  0.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION...

Compatible with blades: CB15U, CB15U-2SP, CB15U-5SP, CB15U-K30*, CB15UA, CB15U-K20-2SP, CB15UA-K30.  1.5mm*** Blade-holder with Red Top, and Brass ...

Compatible with blades: CB09UB, CB09UB-K60 0.9mm, blue top, black brass tip. ATTENTION: If you are using CB09UA Blade (with spring); Insert only th...

Ballpoint pen holder for a black, oil-based pen (KB700-BK).  Shown assembled with the KB700-BK (sold separately).Accessories: BALLPOINT PEN BLACK ...

Creasing tool 0.03” fine tipped creasing tool for paper. Not recommended for E-flute creasing; Fine tip may puncture corrugated boards. Compatible ...

Creasing tool 0.05” tip creasing tool for cardboard Compatible with Graphtec FCX, FC series

SuperSteel replacement cross cutting blade for all FC8600, FC8000, FC7000 MK2 and FC7000 cutting plotters.

Cross Cutter Supersteel Blade for FC Series

Compatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60. Designed for use with 0.9mm CB09UB blades for vinyl and window tint film cutting. N...

Compatible with blades: CB15U-K30*, CB15U, CB15UA, CB15U-K20-2SP, CB15UA-K30.  For use with 1.5mm*** CB15 Blades.  For use with 1.5mm CB15 Blades. ...

Angle 30° Diameter 0.9mm Supersteel Blade for cutting the window tint film or thin film, up to 0.25 mm thick.   Compatible Models# FC, FCX, CE Series

Angle 45° Diameter 1.5mm  Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (laminates, smart device, device screen pro...

Cutting plotter pouncing tool PPA33-TP12 compatible with Graphtec Series FC8600, FC8000, FC7000, FC5100, FC4100.

PPA33-TP12 compatible with Graphtec FC Series only.

Angle 45° Diameter 3mm Supersteel Blade for cutting thick rigid materials such as corrugated paper up to E flute or chipboard up to 2 mm thick.  Co...

Genuine replacement cutting mat for the CE6000 Series of Graphtec cutting plotters.Compatible with CE6000-40/60 or 120, and CE6000 Plus Series. Ple...

Compatible with Magnets SKU# 51409-061B Compatible Models# FC, FCX, CE Series The anti-static cord is made up of tiny conductive micro-fibers that ...

25' 9-25 Pin Serial RS-232-C Cable

Angle 45° Diameter 0.9mm Supersteel blade for vinyl cutting, and self-adhesive marking film (PVC film), up to 0.25 mm thick. The maximum cutting di...

Oil-based pen 0.7 point (KB700-BK), 10 pens/pk Compatible with: Graphtec PHP34-BALL pen holder (Pen holder is not included)

Genuine Graphtec replacement part: FC5100 cutting mat/strip.Please choose your cutter size. Each order contains (1) Teflon cutting Mat/Strip.

10' 9-25 Pin Serial RS-232-C Cable

Reusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet.This cutting...

10' Parallel AC0223PAR-10

10' 25-25 Pin Serial RS-232-C Cable

10' Mac Serial

Genuine Graphtec replacement part. Push/Pinch Roller for FC and CE roll feed cutting plotters. ~15mm diameter (including rubber wheel) ~12mm diame...

Long blade - thick media (soft rubber, polyurethane sheet up to 1 mm) Compatible Models# CE Lite-50

Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area.  This carrier sheet compatible with Graphtec CE Lite-50 for 351 mm (13") wi...

Cross Cutter Standard blade for FC Series

Genuine Graphtec replacement part: FC8600-60 (FC7000)  cutting mat/strip. Please choose your cutter size. Each order contains (1)  cutting mat/stri...